4-Pin Cable to COB LED Strip Connectors – RGB Strip Connections

The 4-Pin Cable to COB LED Strip Connectors provide a quick and reliable way to connect RGB LED strip lights. They work with compatible 10mm COB and SMD LED strips. Therefore, they are ideal for installers, electricians and DIY lighting projects.

These connectors use a transparent PC housing. As a result, the connection stays discreet when installed inside an aluminium LED profile. They also help create a clean finish for indoor LED strip installations.

Easy RGB LED Strip Connections

These 4-pin connectors suit compatible 10mm RGB LED strips. The pins align with the matching contact pads on the LED strip. This helps create a stable electrical connection.

Furthermore, the solder-free design makes installation faster. You do not need to solder the strip or strip the cable. Therefore, these connectors work well for quick repairs, custom lighting and new installations.

They are especially useful inside aluminium profiles. They also suit concealed lighting areas where a neat finish matters.

Key Features

• 4-pin design for compatible RGB LED strips
• Suitable for 10mm wide LED strips
• Compatible with IP20 COB and SMD LED strips
• Transparent PC housing
• Solder-free connection
• No wire stripping required
• Quick installation
• Secure electrical contact
• Suitable for aluminium LED profiles
• Ideal for concealed LED strip lighting
  

  Check LED Strip Compatibility First

  Before installation, check your LED strip carefully. The PCB width, pin layout and contact pad spacing must match the connector.

  In addition, check the RGB wiring configuration before making the connection. A connector cannot correct an incompatible strip layout.

  For this reason, always confirm compatibility before purchasing. This simple check can help prevent connection problems during installation.

  Suitable for COB and SMD LED Strips

  These connectors work with compatible IP20 COB and SMD LED strips. They are particularly useful for RGB lighting systems that require multiple strip sections.

  COB LED strips provide a smooth line of light. Therefore, these connectors can help maintain a clean lighting appearance when used with a suitable aluminium profile.

  However, always confirm the strip specifications before installation. Not every 10mm LED strip uses the same pin arrangement.

  Quick Installation

  The solder-free design makes these connectors easy to use.

  1. Turn off the power before starting.
  2. Check the LED strip width and pin layout.
  3. Cut the LED strip at the correct cutting mark.
  4. Open the connector carefully.
  5. Align the LED strip contacts with the connector pins.
  6. Insert the strip fully into the connector.
  7. Close the connector securely.
  8. Check the connection before switching on the power.

   

  ---