LED TRIAC Dimmable Driver 150W 24V
The Lifud LED TRIAC Dimmable Driver 150W 24V provides reliable power for compatible 24V LED strip lights and LED modules. This 150W 24V TRIAC dimmable LED driver delivers a stable 24V DC output and supports smooth 0–100% dimming.
It works with suitable TRIAC and phase-cut dimmers. Therefore, you can use it for LED lighting projects that need adjustable brightness.
24V Constant Voltage LED Driver
This Lifud LED driver converts 220–240V AC input into 24V DC constant-voltage output.
As a result, it works with compatible 24V LED strip lights and LED modules.
The driver provides:
- 24V DC output
- Up to 150W power
- 6.25A output current
- Constant-voltage operation
- TRIAC dimming
- 0–100% dimming range
Always check the LED product voltage before connecting the driver.
TRIAC Dimming from 0–100%
The LF-GAT150-6250-24 supports TRIAC / phase-cut dimming.
Therefore, you can adjust compatible LED lighting from low brightness to full brightness. The driver supports suitable leading-edge and trailing-edge dimmers.
For the best result, check the dimmer and driver compatibility before installation.
Suitable for 24V LED Strip Lights
This 150W 24V TRIAC dimmable LED driver works with compatible 24V constant-voltage LED products.
You can use it for:
- LED strip lighting
- Cabinet lighting
- Joinery lighting
- Decorative lighting
- Architectural lighting
- Residential lighting
- Retail displays
- Commercial lighting
However, you must check the total LED load before choosing the driver.
150W Maximum Output
The driver provides up to 150W of output power and 6.25A at 24V.
For example, a 24V LED strip using 10W per metre requires:
10m × 10W = 100W
That load exceeds this driver’s 150W rating. Therefore, choose a higher-rated driver for this application.
For a 150W driver, calculate the total LED load first. Then select a suitable driver with enough capacity for the installation.
High Power Factor
The driver has a power factor of more than 0.95 under the manufacturer’s specified conditions.
As a result, the driver offers efficient operation for suitable LED lighting applications.
Built-In Protection
The driver includes protection features for safer operation.
These include:
- Over-voltage protection
- Overload protection
- Short-circuit protection
- Over-temperature protection
Therefore, the driver can help protect the lighting system during abnormal operating conditions.
Flicker-Free LED Lighting
The LF-GAT150-6250-24 uses a flicker-free design.
As a result, it can provide stable light output when used with compatible LED products and dimmers.
This makes the driver a useful choice for residential, retail and commercial lighting applications.
Indoor Applications
The driver has an IP20 rating.
Therefore, use it in a suitable dry indoor location. Do not install the driver where water or moisture can reach the unit.
For outdoor lighting, choose a driver with the correct protection rating for the installation environment.
Australian LED Lighting Applications
The LF-GAT150-6250-24 carries RCM certification for the Australian market.
It can suit many residential and commercial LED lighting projects in Australia when you install it according to the manufacturer’s requirements.
A licensed electrician should complete the mains electrical connection.
How to Choose the Right LED Driver
Before you buy a driver, check three main things.
First, check the voltage.
Your LED strip must require 24V DC.
Second, check the power.
Add the wattage of all connected LED strips or modules.
Finally, check the dimmer.
Use a dimmer that works with TRIAC or phase-cut LED drivers.
For example, if your LED strip uses 10W per metre, a 10m length requires 100W. A 150W driver can supply this load, provided the installation meets the manufacturer’s requirements.
This falls within the 150W maximum output of this driver.
Always check the manufacturer’s specifications before installation.
Important Installation Information
This driver provides 24V DC constant-voltage output. Therefore, use it only with compatible 24V constant-voltage LED products.
Do not connect a 12V LED strip to this driver.
Also, do not connect a constant-current LED product unless the manufacturer specifically confirms compatibility.
Finally, make sure the installation has suitable ventilation and does not expose the driver to water or excessive heat.
Why Choose the LED TRIAC Dimmable Driver 150W 24V ?
The Lifud LED TRIAC Dimmable Driver 150W 24V
combines stable 24V output with TRIAC dimming in one compact LED driver.
It offers:
- 150W maximum output
- 24V constant-voltage output
- 3.125A output current
- 0–100% dimming
- TRIAC / phase-cut control
- High power factor
- Flicker-free operation
- Built-in protection
- RCM certification
- Suitable for compatible 24V LED strip lights
Therefore, it provides a practical solution for dimmable 24V LED lighting projects.
Got questions about this product? [Get in Touch] with our team and we’ll guide you to the perfect match.
