LED TRIAC Dimming Driver 150W | Push Dim
The 150W TRIAC Dimming LED Driver provides stable 24V DC power for compatible LED lighting applications. It combines constant-voltage output with flexible dimming options, making it suitable for indoor LED lighting systems that require adjustable light levels.
With a 150W output and 6.25A current capacity, the driver can power compatible 24V LED loads while supporting dimming from 0–100%.
150W 24V Constant Voltage LED Driver
This LED driver provides a regulated 24V DC output with a maximum output current of 6.25A.
The maximum rated output power is 150W, making it suitable for compatible 24V constant-voltage LED lighting products.
For LED strip lighting applications, explore our LED Strip Lights range.
Always ensure the connected LED load remains within the driver’s rated output power and current.
TRIAC Dimming Support
The driver supports multiple AC phase-cut dimming methods, including:
- Leading-edge TRIAC dimming
- Trailing-edge ELV phase-cut dimming
- AC self-resetting switch dimming
This provides greater flexibility when integrating the driver into suitable dimming systems.
Always confirm compatibility between the driver and the selected dimmer before installation.
0–100% Dimming Range
The 150W TRIAC Dimming LED Driver supports a 0–100% dimming range.
This allows users to adjust the connected LED lighting from low to full brightness when paired with a compatible dimming system.
The wide dimming range makes the driver suitable for applications where lighting levels need to change throughout the day or according to different activities.
Push-Switch Dimming Control
The driver can connect to a compatible push switch for on/off control and dimming.
This provides an alternative control method for suitable installations and can simplify everyday lighting operation.
The switch and wiring configuration must follow the manufacturer’s installation requirements.
40–220V AC Dimming Input Range
The specified dimmer voltage range is 40–220V AC.
The driver supports suitable leading-edge and trailing-edge dimmers within the specified operating range. Always check the dimmer’s specifications and compatibility before installation.
Active Power Factor Correction
The driver features built-in active power factor correction (PFC).
This helps improve the driver’s electrical performance and makes it suitable for professional LED lighting installations where power quality is important.
4kHz PWM Output
The LED driver uses a 4kHz PWM output frequency for dimming control.
This provides controlled LED output when the driver operates with a compatible dimming system.
Multiple Protection Functions
The driver includes several built-in protection features:
- Short-circuit protection
- Over-temperature protection
- Overload protection
- Over-voltage protection
These protection functions help safeguard the driver and connected LED lighting under abnormal operating conditions.
Class II and SELV Design
The driver uses a Class II design with SELV safety ultra-low-voltage output.
The 24V DC output provides low-voltage power for compatible LED lighting applications. Installation must still follow all applicable electrical requirements and manufacturer instructions.
Suitable for Indoor LED Lighting
With an IP20 rating, this LED driver is intended for suitable indoor applications.
It should be installed in a dry location and protected from direct exposure to water or moisture.
For other indoor lighting products, you can also explore our LED Ceiling Lights range.
Long-Term Reliability
The driver is specified with a 5-year warranty and a stated 500,000-hour service-life figure.
These specifications make it suitable for projects where reliable LED power and long-term operation are important.
The actual service life can vary depending on installation conditions, ambient temperature, load and operating environment.
Key Features
- 150W constant-voltage LED driver
- 24V DC output
- 6.25A output current
- 220–240V AC input
- 40–220V AC dimming voltage range
- 0–100% dimming range
- Leading-edge TRIAC compatible
- Trailing-edge ELV phase-cut compatible
- AC self-resetting switch dimming
- Push-switch on/off and dimming
- Active power factor correction
- 4kHz PWM
- Short-circuit protection
- Over-temperature protection
- Overload protection
- Over-voltage protection
- Class II design
- SELV ultra-low-voltage output
- IP20
- 5-year warranty
- Suitable for indoor LED lighting
Why Choose the 150W TRIAC Dimming LED Driver?
The 150W TRIAC Dimming LED Driver provides a flexible power and dimming solution for compatible 24V LED lighting.
Its 24V DC, 6.25A and 150W output supports a wide range of suitable constant-voltage LED loads. In addition, leading-edge, trailing-edge and push-switch dimming options provide greater flexibility when designing the lighting control system.
For compatible LED products and accessories, visit the Vesta Lines Shop.
Got questions about this product? [Get in Touch] with our team and we’ll guide you to the perfect match.
