IP67 LED Strip Joiner for RGB LED Strips
The IP67 LED Strip Joiner provides a quick way to connect compatible 10mm RGB COB and SMD LED strips. This 4-pin connector joins two LED strips without soldering or wire stripping.
It is easy to install. Therefore, it works well for both professional installers and DIY users. The IP67 design also suits compatible waterproof LED strip systems.
4 Pin RGB LED Strip Joiner
This IP67 LED Strip Joiner is made for compatible 10mm 4-pin RGB LED strips. It works with RGB COB and SMD strips when the PCB width and contact pads match.
The transparent PC housing gives the connector a clean look. In addition, it works well inside aluminium LED profiles and other hidden lighting areas.
You can find compatible products in our LED Strip Lights and LED Strip Connectors ranges.
Easy Solder-Free Connection
The connector lets you join two LED strips without soldering. As a result, you can save time during installation.
First, switch off the power. Next, cut both LED strips at the correct cutting marks. Then, line up the PCB contact pads with the connector pins.
After that, close the connector firmly. Finally, test the connection before you turn the power back on.
This simple process makes the connector useful for new installations, repairs and LED strip extensions.
IP67 Waterproof LED Strip Connection
The IP67 design helps protect the connection from dust and water when used as part of a suitable waterproof LED strip system.
For this reason, the connector can suit outdoor decorative lighting and other areas where moisture may be present. It can also work well for indoor RGB lighting, aluminium profiles, retail displays and architectural projects.
However, the complete LED lighting system must suit the installation environment.
Compatible 10mm RGB COB and SMD LED Strips
The connector suits compatible 10mm RGB COB and SMD LED strips. However, not every 10mm RGB strip uses the same PCB layout.
Before you buy, check the strip width, contact pads and pin layout. Also, check the spacing between the pads.
If the layout does not match, the connector may not make a correct electrical connection. Therefore, always check compatibility before installation.
Common Applications
You can use this connector for:
- RGB LED strip extensions
- Outdoor decorative lighting
- Architectural lighting
- Aluminium LED profile lighting
- Retail displays
- Cabinet and shelf lighting
- Commercial lighting
- DIY RGB LED projects
The IP67 LED Strip Joiner is supplied as 1 strip-to-strip RGB LED connector.
For more information about LED lighting technology and solderless LED connections, see LED Professional.
