CERIAN 24V 200W LED Driver – CE.DR24-200
The CERIAN 24V 200W LED Driver is a constant voltage power supply designed to provide stable and reliable power for 24V LED strip lights and low-voltage LED lighting systems. With a maximum output of 200W and 8.33A, it is suitable for powering larger LED strip installations and other compatible 24V lighting products.
The CE.DR24-200 operates from 220–240V AC input and provides a regulated 24V DC constant voltage output. This makes it a suitable power solution for 24V COB LED strips, SMD LED strips, single-colour LED lighting and other compatible 24V applications.
For easy installation, the driver comes with a 1200mm flex cable and Australian 2-pin plug. Its slim 205 × 71 × 35mm housing also makes it easier to position inside suitable cabinets, ceiling spaces and behind lighting fixtures.
Safety features include short-circuit protection and electrical isolation, helping provide dependable operation when installed correctly. The driver has an IP20 rating and is designed for indoor, dry environments.
The CE.DR24-200 is a non-dimmable LED driver, making it ideal for installations where constant, stable LED output is required without dimming control.indoor lighting
Key Features
- 24V DC constant voltage output
- 200W maximum power
- Approximately 8.33A output current
- Input: 220–240V AC, 50/60Hz
- Suitable for compatible 24V LED strip lights
- Suitable for COB and SMD LED strips
- Suitable for single-colour and compatible RGB LED lighting
- Short-circuit protection
- Electrically isolated design
- IP20 indoor rating
- Non-dimmable
- 1200mm flex cable
- Australian 2-pin plug
- Slim 205 × 71 × 35mm housing
- Efficiency >85% typical
- Power factor >0.9
- Operating temperature -20°C to +45°C
Applications
The CERIAN CE.DR24-200 24V LED Driver is suitable for:
- 24V COB LED strip lights
- 24V SMD LED strip lights
- Single-colour LED strips
- Compatible RGB LED strips
- LED modules
- Under-cabinet lighting
- Display lighting
- Signage lighting
- Architectural lighting
- Feature lighting
- Decorative indoor lighting
- Commercial indoor lighting
Installation Notes
- Indoor use only – IP20 rated.
- Do not install the driver in wet or exposed outdoor locations.
- Ensure adequate ventilation around the power supply.
- Do not cover the driver during operation.
- Check that the LED load requires 24V DC constant voltage before connection.
- Do not exceed the maximum 200W output capacity.
- This model is non-dimmable.
- Do not connect directly to a standard mains dimmer.
- Installation should be carried out by a suitably qualified electrician where required.
Why Choose the CERIAN 24V 200W LED Driver?
The CERIAN 24V 200W LED Driver provides a practical power solution for larger 24V LED lighting installations. Its constant voltage output delivers stable power to compatible LED strips, while the 200W capacity supports higher-load lighting systems.
The built-in short-circuit protection, electrical isolation, Australian 2-pin plug and slim housing make it a convenient option for suitable indoor installations.
For 24V LED strip projects that require reliable and consistent power, the CE.DR24-200 provides a straightforward solution.
