CERIAN 24V 150W Driver
The 24V 150W LED Driver is a reliable constant voltage power supply for 24V LED strip lights and other low-voltage LED lighting systems. With a maximum output of 150W and 6.25A, it provides stable power for indoor lighting installations.
The driver features short-circuit protection, electrical isolation and a slim housing for easy installation. It also includes a 1200mm flex cable with an Australian 2-pin plug, making it convenient for suitable indoor applications.
Use this 24V LED power supply for COB and SMD LED strips, under-cabinet lighting, display lighting, signage and decorative lighting. The IP20 rating makes it suitable for dry indoor environments.
Key Features
SEO Product Content
Reliable 24V 150W LED Driver for LED Strip Lighting
The CERIAN CE.DR24-150 24V 150W LED Driver provides stable and reliable power for 24V LED strip lighting. Its constant voltage output helps maintain consistent lighting performance across suitable LED installations.
With 150W of maximum power and 6.25A output current, this driver can power a range of 24V LED strip lights and low-voltage lighting products. It works well with single-colour COB and SMD LED strips, as well as other compatible 24V lighting systems.
Stable 24V Constant Voltage Output
The driver provides a 24V DC constant voltage output, which suits many 24V LED strip lighting systems. Correct voltage matching helps your LED strip operate safely and consistently.
For best performance, select a driver with enough capacity for the total wattage of your LED installation. We recommend allowing some additional capacity rather than running the driver continuously at its maximum rated load.
150W Power Capacity
With a maximum output of 150W, the CE.DR24-150 delivers up to 6.25A at 24V. This makes it suitable for medium-sized indoor LED strip lighting installations.
Before installation, check the total wattage of your LED strips and accessories to ensure the load remains within the driver’s rated capacity.
Slim Design for Easy Installation
The slim housing makes this 150W LED driver easier to position in suitable indoor spaces. It can be used in applications such as cabinets, joinery, display areas and ceiling lighting installations where the driver needs to remain discreet.
Always provide adequate ventilation around the driver. Do not cover the power supply or install it where heat cannot escape.
Built-In Protection
The CE.DR24-150 includes short-circuit protection and an electrically isolated design. These features help provide a safer and more reliable power solution for compatible 24V LED lighting systems.
The driver has an IP20 rating, so it should only be installed in dry indoor locations.
Australian 2-Pin Plug
This LED power supply comes with a 1200mm flex cable and Australian 2-pin plug. This provides a convenient connection for suitable indoor installations and reduces the need for additional plug components.
Suitable Applications
The 24V 150W LED driver is suitable for:
- 24V COB LED strip lights
- 24V SMD LED strip lights
- Under-cabinet lighting
- Kitchen and joinery lighting
- Display cabinet lighting
- Retail and commercial feature lighting
- Indoor signage
- Architectural lighting
- Decorative LED installations
Important Installation Information
The CE.DR24-150 is an IP20 indoor power supply. Do not install it outdoors or in areas exposed to water or moisture.
The driver is non-dimmable, so it should not be connected directly to a mains dimmer. If your lighting system requires dimming or control, use a compatible control system designed for the LED driver and strip configuration.
Installation should be completed by a suitably qualified electrician where required.
